250.O9999
RRP
£15.92
(£13.27 excl. VAT)
Disk Pad Set for Hand Brake | Polaris | Ranger 1000 2015-19
Used On:
POLARIS
Fitting Manual (Receieved from a happy customer!)
Fitting Instructions (from personal experience)
1 Lift the cab and remove the bottom link of the gas strut for better access
2 Remove the clevis pins from gear selector and handbrake cables
3 Slacken the adjusting nuts of both cables so they come away from the bracket
4 Remove the two bolts holding the bracket and pad assembly
5 Note the orientation of the bracket,pads and operating arm (they can be assembling in many different incorrect ways) and remove
6 Remove the pad assembly and use cutting disc or saw to remove the rivetted pins
7 Carefully open, clean and lubricate the operating lever and spring mechanism (don’t lose the springs or the three loose ball bearings)
8 Reassemble springs, lever and new pads with supplied bolts (this is where step number 5 above really matters)
9 Refit in reverse order to above steps
10 Be pleased that you now have a good brake with better pads
