Menu
menu
/
/
/
/
High Output Stator 75 W Yamaha YFS 200 Blaster 1988-2006
We are a wholesalers, please contact our dealers for ATV Parts.
print
Print this page

High Output Stator 75 W Yamaha YFS 200 Blaster 1988-2006

SKU: RM01091
Item Condition: New

Out of stock

RRP:
£82.75
(£68.96 excl. VAT)
This product is currently out of stock.

Want to be notified when this product is back in stock?

Full Description
Technical Details

Brand new high output stator 75 watts

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Connector included
  • Rubber grommet included
  • Adjustable timing plate to advance and retard up to 10 degrees included
  • 75 watts output so you can run brighter light

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Used on:

Yamaha YFS 200 Blaster 1988 -2006


Replaces the following OE reference numbers

  • 2XJ-85560-M0-00
  • 3JM-85560-00-00
  • 5VM-85560-00-00

Plug-and-Play / Direct Fit

For full application / interchanges listing, please see our part Application / Fitment section

Alternator : Yellow To Black (resistance 0.6 ohms+/- 20%
Pick up 1 : White / Red To Black (resistance 20 ohms+/- 20%)
Source 1 : Black / Red To Green / White (resistance 280 ohms+/- 20%)
Number of wires : 5 wires + extra green wire see instructions
Power : 75 watts
Dimensions Inside Diameter : 54 mm
Outside Diameter : 115 mm Thickness : 15 mm

Before installing your new stator

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Note:

  • Our stator is made with 5 wires to accommodate all years of the Blaster 200.
  • The 2003 and newer models used a 5-wire configuration on the stator (The source coil is not grounded, both of it’s wires run to the CDI box).
  • Every model before that used the 4-wire configuration (The source coil IS grounded on the stator plate, only 1 wire runs to the CDI box).
  • This is why our stator includes a separate Green with a bullet connector on end, and a ring terminal on the other. It is used to ground the
    Green/White wire from the source coil on our stator to match the earlier model configuration.
  • If our stator is used on 2003 and newer model, all 5 wires plug in directly to their matching colors on the bike’s harness, and our included extra Green wire with ring terminal is not used.
  • If our stator is used on a 2002 and older model:
  • Our stator Yellow/Red to same color on bike (lighting coil)
  • Our stator White/Red to same color on bike (pickup coil)
  • Our stator Black to same color on bike (ground)
  • Our stator Black/Red to same color on bike (source coil)
  • Our stator Green/White wire to our included Green wire with bullet connector. Ground the other side of this green wire (ring terminal) to the frame.
Part Application/Fitment
Model
Code
Year
Manufacturer
Engine
YFS 200 Blaster
RM01091
1988
Yamaha
YFS 200 Blaster
RM01091
1998
Yamaha
YFS 200 Blaster
RM01091
2005
Yamaha
YFS 200 Blaster
RM01091
2004
Yamaha
YFS 200 Blaster
RM01091
2003
Yamaha
YFS 200 Blaster
RM01091
2002
Yamaha
YFS 200 Blaster
RM01091
2001
Yamaha
YFS 200 Blaster
RM01091
2000
Yamaha
YFS 200 Blaster
RM01091
1999
Yamaha
YFS 200 Blaster
RM01091
1997
Yamaha
YFS 200 Blaster
RM01091
1989
Yamaha
YFS 200 Blaster
RM01091
1996
Yamaha
YFS 200 Blaster
RM01091
1995
Yamaha
YFS 200 Blaster
RM01091
1994
Yamaha
YFS 200 Blaster
RM01091
1993
Yamaha
YFS 200 Blaster
RM01091
1992
Yamaha
YFS 200 Blaster
RM01091
1991
Yamaha
YFS 200 Blaster
RM01091
1990
Yamaha
YFS 200 Blaster
RM01091
2006
Yamaha
Interchanges/Cross References
Model
Code
2XJ-85560-M0-00
Yamaha
3JM-85560-00-00
Yamaha
5VM-85560-00-00
Yamaha
2XJ-85560-M0-00
Yamaha
3JM-85560-00-00
Yamaha
5VM-85560-00-00
Yamaha