*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Used on
| Can-am | Outlander 1000 | 2012 | -2012 |
| Outlander 330 | 2004 | -2005 | |
| Outlander 400 | 2003 | -2015 | |
| Outlander 500 | 2007 | -2014 | |
| Outlander 500 XT | 2007 | -2009 | |
| Outlander 650 | 2006 | -2016 | |
| Outlander 650 DPS | 2013 | -2013 | |
| Outlander 650 XT | 2006 | -2009 | |
| Outlander 650 XT | 2013 | -2013 | |
| Outlander 800 | 2006 | -2008 | |
| Outlander 800 R | 2009 | -2014 | |
| Outlander Max 400 | 2004 | -2014 | |
| Outlander Max 500 | 2007 | -2014 | |
| Outlander Max 650 | 2006 | -2013 | |
| Outlander Max 650 | 2015 | -2015 | |
| Outlander Max 800 | 2006 | -2008 | |
| Outlander Max 800 R | 2009 | -2012 | |
| Outlander Max XT 500 | 2008 | -2008 | |
| Outlander Max XT 650 | 2008 | -2009 | |
| Outlander Max XT 650 | 2016 | -2016 | |
| Renegade 1000 | 2012 | -2015 | |
| Renegade 500 | 2008 | -2015 | |
| Renegade 800 | 2007 | -2008 | |
| Renegade 800 R | 2009 | -2015 |
Replaces the following OE reference numbers
420296907
420684850
420685920
Plug-and-Play / Direct Fit
Number of wires : 3
Number of terminals : 3
Alternator : Yellow between each Yellow = 0.4 ohms+/-20%
Alternator : Yellow to Ground+/- O.L. ON DISPLAY
Exterior Diameter : 104 mm
Inside Diameter : 41 mm
Thickness : 30 mm
Before installing your new stator
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
