Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.Wire to wire resistance:
Yellow to Yellow = 0.4 ohms +/- 20%
Interior diameter = 41 mm
Exterior diameter = 106 mm
Thickness = 21 mm