Out of stock
Want to be notified when this product is back in stock?
Note: The OEM 3086982 have 2 possibles CDI for some Polaris models, compare your original part with our product before purchasing
We highly recommend replacing the voltage regulator rectifier at the same time as the CDI unit. It is the reason for CDI failures. These unit are triple tested at the factory to make sure they perform properly.
*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.
Used on
| Polaris | Big Boss 500 | 1998 | -1999 |
| Int'l Big Boss | 2000 | -2000 | |
| Int'l Big Boss | 2002 | -2002 | |
| Int'l Big Boss 500 | 1999 | -1999 | |
| Int'l Big Boss 500 | 2001 | -2001 | |
| Magnum 425 | 1998 | -1998 | |
| Magnum 425 2×4 | 1995 | -1997 | |
| Magnum 425 4×4 | 1995 | -1997 | |
| Magnum 425 6×6 | 1996 | -1997 | |
| Magnum 500 | 1999 | -1999 | |
| Magnum 500 4×4 | 2000 | -2001 | |
| Magnum 500 EB | 2000 | -2000 | |
| Magnum 500 HDS 2×4 | 2002 | -2002 | |
| Magnum 500 HDS 4×4 | 2000 | -2001 | |
| Magnum 500 HDS 4×4 | 2003 | -2003 | |
| Scrambler 400 2×4 | 2000 | -2000 | |
| Scrambler 500 | 1997 | -2000 | |
| Scrambler 500 2×4 | 2001 | -2002 | |
| Scrambler 500 4×4 | 2001 | -2002 | |
| Sportsman 335 | 1999 | -2000 | |
| Sportsman 400 | 2001 | -2002 | |
| Sportsman 500 | 1996 | -2000 | |
| Sportsman 500 4×4 Carb | 2001 | -2001 | |
| Sportsman 500 6×6 Carb | 2001 | -2002 | |
| Worker 335 | 1999 | -1999 | |
| Worker 500 | 1999 | -2000 | |
| Xplorer 400 L | 1995 | -1995 | |
| Xplorer 500 | 1997 | -1997 | |
| Polaris | Ranger 425 | 2003 | -2003 |
| Ranger 500 6×6 | 1999 | -1999 | |
| Ranger 500 Series 10 2×4 | 2003 | -2003 | |
| Ranger 500 Series 10 4×4 | 2003 | -2003 | |
| Ranger 500 Series 10 6×6 | 2003 | -2003 | |
| Ranger 500 Series 11 | 2004 | -2004 |
Replaces the following OE reference numbers
3084691
3085382
3085564
3085639
3086982
Plug-and-Play / Direct Fit
Previous Product Code
IPO6007 / IPO6003
The only real way to test your CDI box is to swap it out with another known good unit from the same year/make/model. Because of this, we recommend that you rule everything else out before replacing the CDI box.
Our CDI may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This CDI is designed as a direct plug-in replacement and should be used as such.