*This Stator does not include the factory 16 gang connector.
There is more than one possible stator for the sportsman 700 Non-efi 4×4 2004 and the Sportsman 600 2004.
The RM01330 OD is 108mm, ID 40mm, thickness is 13mm.
Please call for further clarification.
We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Used on
| Polaris | Sportsman 700 | 2007 | -2007 |
| Sportsman 800 | 2007 | -2007 | |
| Sportsman X2 800 | 2007 | -2007 |
Replaces the following Oe reference numbers
4011609
Plug-and-Play / Direct Fit
Number of wires : 9
Number of terminals : 11
Alternator : Yellow/Red to Yellow to Yellow = 0.4 ohms+/-20%
Pick up : Blue to Green = 200 ohms =/-20%
Position Sensor : Red to White = 0.3 ohms+/- 20%
Black is Ground
Before installing your new stator
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
