*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Used on:
Yamaha | YFS 200 Blaster | 1988 | -2006 |
Replaces the following OE reference numbers
Plug-and-Play / Direct Fit
For full application / interchanges listing, please see our part Application / Fitment section
Alternator : Yellow To Black (resistance 0.6 ohms+/- 20%
Pick up 1 : White / Red To Black (resistance 20 ohms+/- 20%)
Source 1 : Black / Red To Green / White (resistance 280 ohms+/- 20%)
Number of wires : 5 wires + extra green wire see instructions
Power : 75 watts
Dimensions Inside Diameter : 54 mm
Outside Diameter : 115 mm Thickness : 15 mm
Before installing your new stator
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Note: