All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Used on
Honda | TRX 250 Recon TE | 2005 | -2009 |
TRX 250 Recon TE | 2011 | -2014 | |
TRX 250 Recon TM | 2005 | -2009 | |
TRX 250 Recon TM | 2011 | -2014 |
Replaces the following OE reference numbers
31120-HM8-B00
Number of wires : 5
Number of plugs : 2
Number of terminals : 5
Harness length – Stator to grommet (mm) : 92
Harness length – Grommet to plug (mm) : 250
Pick-up coil wire length – Coil to grommet (mm) : 120
Inside diameter (mm) : 35
Outside diameter (mm) : 88
Thickness (mm) : 18
Alternator resistance (Yellow to Yellow) : 0.4 ohms +/- 20%
Source 1 resistance (Black/Red to Green) : 185 ohms +/- 20%
Pick-up 1 resistance (Blue/White to Green): 280 ohms +/-20%
Before installing your new stator
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".