We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Used on
| Honda | TRX 500 Fourtrax Foreman FE | 2012 | -2013 |
| TRX 500 Fourtrax Foreman FM | 2012 | -2013 | |
| TRX 500 Fourtrax Foreman FPE EPS | 2012 | -2013 | |
| TRX 500 Fourtrax Foreman FPM | 2013 | -2013 | |
| TRX 500 Fourtrax Foreman FPM EPS | 2012 | -2012 | |
| TRX 500 Fourtrax Foreman FPM Power Steering | 2012 | -2012 |
Replaces the following OE reference numbers
31120-HR0-F01
Alternator resistance (Yellow to Yellow) : 0.4 ohms +/- 20%
Pick-up 1 resistance (Blue/Yellow to Green) : 239 ohms +/- 20%
Number of wires : 5
Number of plugs : 1
Number of terminals : 5
Harness length – Stator to grommet (mm) : 130
Harness length – Grommet to plug (mm) : 270
Pick-up coil wire length – Coil to grommet (mm) : 70
Inside diameter (mm) : 41
Outside diameter (mm) : 107
Thickness (mm) : 21
Before installing your new stator
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
