Stator Coil For Kawasaki KVF 300 Prairie 1999-2002 Replaces 21003-1343

Dimensions :

Interior diameter : 38mm 

Exterior diameter : 102mm 

Thickness : 18mm 

Length of wires stator to grommet : 200mm 

Length of wires grommet to plug : 250mm 

Length of pickup coil's wire to grommet : 200mm 

 

Other specifications :

Number of wires : 5 

Number of plugs : 2 

Number of pins : 5 



Wire to wire resistance :

Alternator : Black between each Black = 0.4ohms +/-20%

Pickup : Blue to Green = 125ohms +/-20%

Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original. `

All of the wires are installed in the correct order; please do not change any of the wiring configurations.

This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.

If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.