We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Used on
| Arctic Cat | 700 H1 | 2008 | -2011 |
| Mudpro 1000 | 2010 | -2012 | |
| Mudpro 700 | 2009 | -2012 | |
| TBX 700 | 2010 | -2012 | |
| Thundercat 1000 | 2008 | -2010 | |
| TRV 1000 | 2010 | -2012 | |
| TRV 550 | 2010 | -2015 | |
| TRV 700 | 2009 | -2012 | |
| 550 | 2010 | -2013 | |
| 700 | 2012 | -2012 | |
| 1000 | 2011 | -2014 | |
| Arctic Cat | Prowler 1000 | 2009 | -2014 |
| Prowler 1000 International | 2014 | -2014 | |
| Prowler 550 | 2009 | -2014 | |
| Prowler 700 | 2008 | -2012 |
Replaces the following OE reference numbers
0802-041
Plug-and-Play / Direct Fit
Number of wires : 5
Number of terminals : 5
Alternator : White Between each White = 0.4 ohms+/-20%
Alternator : White to Ground = O.L ON DISPLAY
Pick up : Blue to Green = 200 ohms+/-20%
Before installing your new stator
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
