Replacement Stator | Can-Am
Brand new aftermarket Stator
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !
Please Note There are two possible stator for most of the Outlander models from 2016 through 2019. This stator is for all the models but the standard packages. For the standard models, please refer to RM01267.
Used on the following applications:
|
Defender HD5 500 |
2017 |
2020 |
|
Outlander 450 |
2019 |
|
|
Outlander 450 T3 EFI F/C |
2018 |
2019 |
|
Outlander 570 |
2018 |
2020 |
|
Outlander 570 T3 DPS EFI F/C |
2019 |
2020 |
|
Outlander 570 T3 PRO EFI L/C |
2019 |
2020 |
|
Outlander 570 T3 Pro Nordic EFI L/C |
2019 |
2020 |
|
Outlander L 450 |
2015 |
|
|
Outlander L Max 450 |
2015 |
2016 |
|
Outlander L Max 500 |
2015 |
2016 |
|
Outlander Max 450 |
2017 |
2020 |
|
Outlander Max 450 T3 EFI F/C |
2019 |
2020 |
|
Outlander Max 570 |
2017 |
2017 |
|
Outlander Max 570 T3 EFI F/C |
2018 |
|
|
Outlander Max 570 T3 Pro Nordic EFI F/C |
2019 |
2020 |
|
Outlander Max 570 T3 XT |
2020 |
|
|
Renegade 570 |
2018 |
|
|
Traxter HD5 |
2018 |
2020 |
Replaces these genuine manufacturers’ part numbers:
|
420685921 |
|
|
|
|
|
|
|
|
|
|
|
|
For full application / interchanges listing, please see our part Application / Fitment section below
Dimensions :
Interior diameter : 42 mm
Exterior diameter : 104 mm
Thickness : 24 mm
Length of wires stator to grommet : 155 mm
Length of wires grommet to plug : 1420 mm
Other specifications :
Number of wires : 3
Number of plugs : 1
Number of pins : 3
Number of poles : 18
Alternator :Yellow to Yellow = 0.7 ohms +-20%
