Replacement Stator | Polaris
Also available
Stator Cover Gasket RMS050-103505
Perfect to complement your Stator.
Used on the following applications:
Magnum 425 2×4 |
1995 |
1998 |
Magnum 425 4×4 |
1995 |
1998 |
Magnum 425 6×6 |
1996 |
1997 |
Ranger 425 |
2003 |
|
Ranger 500 Series 11 |
2004 |
|
Sportsman 335 |
1999 |
2000 |
Sportsman 400 |
2001 |
2002 |
Sportsman 500 4×4 |
1996 |
1997 |
Worker 335 |
1999 |
|
Xpedition 425 |
2000 |
2002 |
Xplorer 500 |
1997 |
Replaces these genuine manufacturers’ part numbers:
3084974 |
3086860 |
3086239 |
3086232 |
3087141 |
For full application / interchanges listing, please see our part Application / Fitment section below
Number of wires : 9
Number of terminals : 12
Alternator : Yellow to Yellow/Red = 0.5 ohms+/-20%
Pick up 1 : White/Red to White = 115 ohms+/-20%
Source 1 : Black/Red to Red = 450 ohms+/-20%
Source 2 : Red to Green = 4.1 ohms+/-20%
Before installing your new stator
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".