We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Used on
Yamaha | YFB 250 Timberwolf | 1994 | -2000 |
YFM 250 Bear Tracker | 1999 | -2000 | |
YFM 250 Bear Tracker California | 1999 | -2000 |
Replaces the following OE reference numbers
4BD-85510-20-00
Plug-and-Play / Direct Fit
Number of wires : 7
Number of terminals : 7
Alternator : Yellow Between each Yellow = 0.8 ohms+/-20%
Before installing your new stator
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".