We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Used on
| Yamaha | YFM 400 Grizzly | 2007 | -2008 |
| YFM 400 Kodiak | 2000 | -2006 | |
| YFM 450 Grizzly | 2007 | -2014 | |
| YFM 450 Kodiak | 2003 | -2006 | |
| YFM 450 Wolverine | 2006 | -2010 |
Replaces the following OE reference numbers
5GH-81410-00-00
5ND-81410-00-00
Plug-and-Play / Direct Fit
Number of wires : 7
Number of terminals : 7
Alternator : White Between each White = 0.4 ohms+/-20%
Pick up : Green to Blue = 450 ohms+/-20%
Position Sensor : White/Blue to Red = 0.4 ohms+/-20%
Before installing your new stator
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
