We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Used on
Yamaha | YFM 350 Big Bear | 1988 | -1988 |
YFM 350 Big Bear | 1990 | -1994 | |
YFM 350 Moto-4 | 1990 | -1990 | |
YFM 350 Moto-4 | 1992 | -1994 | |
YFM 350 Warrior | 1990 | -1995 | |
YFM 350 Warrior Maine/NH | 1991 | -1995 |
Replaces the following OE reference numbers
3HN-85510-00-00
Plug-and-Play / Direct Fit
Number of wires : 7
Number of terminals : 7
Alternator : White between each White = 0.9 ohms+/-20%
Alternator : White to Ground = O.L. ON DISPLAY
Picku up : Red to White = 500 ohms+/-20%
Source : Green to Black = 300 ohms+/-20%
Before installing your new stator
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".