Replacement Stator | Yamaha
Don’t forget to compliment your new Stator with a brand new Cover Gasket: RM08001
Used on the following applications:
YFM 350 Big Bear 2×4 |
1996 |
1998 |
YFM 350 Big Bear 4×4 |
1995 |
1997 |
YFM 350 Moto-4 |
1995 |
|
YFM 350 Warrior |
1996 |
2001 |
YFM 350 Warrior California |
1998 |
2001 |
YFM 350 Warrior Maine/NH |
1996 |
1997 |
YFM 400 Kodiak |
1993 |
1998 |
Replaces these genuine manufacturers’ part numbers:
4GB-85510-00-00 |
3HN-85510-10-00 |
For full application / interchanges listing, please see our part Application / Fitment section below
Number of wires : 7
Number of terminals : 7
Alternator : White Between each White = 0.9 ohms+/-20%
Alternator : White to Ground = O.L. ON DISPLAY
Pickup : Red to White= 500 ohms+/-20%
Source : Green to Black = 300 ohms+/-20%
Before installing your new stator
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".