Replacement Stator | Yamaha
Don’t forget to compliment your new Stator with a brand new Cover Gasket: RM08002
Used on the following applications:
YFM 600 Grizzly |
1999 |
2001 |
YFM 600 Grizzly California |
2000 |
Replaces these genuine manufacturers’ part numbers:
5GT-85510-00-00
For full application / interchanges listing, please see our part Application / Fitment section below
Number of wires : 7
Number of terminals : 7
Alternator : White Between each White = 0.9 ohms+/-20%
Alternator : White to Ground = O.L. ON DISPLAY
Pick up 1 : Red to White = 500 ohms+/-20%
Source 1= Green to Black = 300 ohms+/-20%
Before installing your new stator
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".